ProformancePlus
RePower Engines brings you Proformance Plus to give
you that little extra when you need it -- pulling a boat, RV, camper, 4x4 or any
other job that needs a little more horse power. In fact, a
Proformance Plus engine gives you about 25%
more HORSE POWER.
Here’s how we do it.
PERFORMANCE ONE
STROKER LONGBLOCKS BELOW
"LET'S
GO RACING"
We take a standard block and bore and hone the cylinders to
.060 oversize, replace stock
pistons with flat top pistons, replace the cam shaft with a high
performance cam and of course we supply you with the best gaskets in the
business (Fel-Pro)and Federal Mogul "Nascar Garage" racing
bearings.
Cylinder heads are remanufactured using 1.940 intake valves that have had the exhaust
ports polished & ported for better exhaust flow. Hardened seats
and new hardened steel valves are used to insure that
this vehicle will run on regular or unleaded gasoline. Brass inserts are
press fitted in the
guides to insure long life.
SCROLL DOWN
THE PAGE FOR ALL APPLICATIONS
APPLICATIONS AVAILABLE
***Prices subject to change without notice*** |
| Year |
Engine Size |
PART #
|
Cost |
|
FORD
LONGBLOCKS
5yr/100K warranty |
|
1981-86 |
302 - 5.0
Liter
Carbureted or
throttle body only!! MPFI will not work!
5yr/100K
warranty |
3029.1HP |
$1729 exchanged plus a $250 core deposit
|
|
| Year |
Engine Size |
PART #
|
Cost |
|
GENERAL MOTORS
LONGBLOCKS
5yr/100K warranty |
| 1969-79 |
350 - 5.7 Liter
4 bolt
main, Left hand dipstick (Driver Side Dip) |
4250.2HP |
$1789 exchanged plus a $400 core deposit |
| 1969-79 |
350 - 5.7 Liter
2 bolt
main, Left hand Dipstick |
3502.2HP |
$1789 exchanged plus a $350 core deposit |
| 1980-85 |
350 - 5.7 Liter
2 bolt
main, Right hand Dipstick ( Passenger Side Dip) |
2350.1HP |
$1789 exchanged plus a $375 core deposit |
| 1980-85
|
350 - 5.7 Liter
4 bolt
main, Right hand Dipstick |
3350.1HP |
$1789 exchanged plus a $450 core deposit |
|
1987-95 |
PERFORMANCE ONE, EFI Only, Non
Roller, 2 bolt main, Block #638, Head #191, 193, Valve Cover Bolts thru
center of valve cover, 9:1 comp ratio, ported & polished heads, RV Cam |
2357.4HP |
$1885
exchanged plus a $500 core deposit |
|
1987-95 |
PERFORMANCE ONE, EFI Only, Non
Roller, 4 bolt main, Block #638, Head #191, 193, Valve Cover Bolts thru
center of valve cover, 9:1 comp ratio, ported & polished heads, RV Cam |
3357.4HP |
$1895
exchanged plus a $500 core deposit |
|
Now introducing from
RePower Engines Performance Line
BLUEPRINT ENGINES
General Motors 355 w/Vortec
Heads
30 month/50,000 mile warranty
|
Part # BP3550CT |
385 Horsepower & 405
Foot/pounds of torque |
|
Price
$3,549 + shipping |
9.5 : 1 Compression ratio |
|
Base Engine: 4 Bolt Main 2
Piece Rear Main Seal |
NEW
Vortec Heads, SCAT cast Iron crank, Keith Black Hypereutectic Pistons,
GM Heavy Beam Rods and Professional Products Aluminum dual plane intake
manifold |
|
Cam Specs: Hydraulic Flat Tappet, .480 intake, .486
exhaust lift,224 intake & 230 exhaust duration @ .050 - 110 degree lobe
sep |
Also
Includes 150 PSI rod bolts, double roller timing set, chrome oil pan
timing cover and valve covers |
1-888-355-7155
|
Part # BP3550CTC |
385 Horsepower & 405
Foot/pounds of torque |
|
Price
$4,999 + shipping |
9.5 : 1 Compression ratio |
|
Base Engine w/Carburetor and
extras |
NEW
Vortec Heads, SCAT cast Iron crank, Keith Black Hypereutectic Pistons,
GM Heavy Beam Rods and Professional Products Aluminum dual plane intake
manifold |
|
Cam Specs: Hydraulic Flat Tappet, .480 intake, .486
exhaust lift,224 intake & 230 exhaust duration @ .050 - 110 degree lobe
sep |
Extras
are Edelbrock Fuel Pump, Edelbrock 600cfm carburetor, MSD Pro-Billet
Distributor, Blaster 2 Coil and Edelbrock water pump, MSD Plug wires,
Champion Spark plugs and Professional Products harmonic Damper |
General Motors 355 w/Cast Components
30 month/50,000 mile warranty
|
Part # BP3555CT |
360 Horsepower & 380
Foot/pounds of torque |
|
Price
$4,795 + shipping |
9.5 : 1 Compression ratio |
| Base
Engine: 4 Bolt Main 2 Piece Rear Main Seal |
DART Aluminum Heads & SCAT cast Iron crank w/ Keith
Black Hypereutectic Pistons SCAT I-Beam Rods and Professional Products
Aluminum dual plane intake manifold |
| Cam
Specs: Hydraulic Flat Tappet, .480 intake, .486 exhaust lift,224 intake
& 230 exhaust duration @ .050 - 110 degree lobe sep |
Also Includes Blueprint Series Aluminum Valve Covers,
Silver Seal chrome oil pan and timing cover and Professional Products
Harmonic damper |
1-888-355-7155
|
Part # BP3555CTC |
360 Horsepower & 380
Foot/pounds of torque |
|
Price $6,295 +
shipping |
9.5 : 1 Compression ratio |
|
Base Engine w/Carburetor and
extras |
DART
Aluminum Heads & SCAT cast Iron crank w/ Keith Black Hypereutectic
Pistons SCAT I-Beam Rods and Professional Products Aluminum dual plane
intake manifold |
|
Cam Specs: Hydraulic Flat Tappet, .480 intake, .486
exhaust lift,224 intake & 230 exhaust duration @ .050 - 110 degree lobe
sep |
Extras
are Edelbrock Fuel Pump, Edelbrock 600cfm carburetor, MSD Pro-Billet
Distributor and Edelbrock water pump |
1-888-355-7155
|
Part # BP3555CTF |
390 Horsepower & 395
Foot/pounds of torque |
|
Price $8,295 +
shipping |
9.5 : 1 Compression ratio |
|
Base Engine w/ Fuel Injection |
DART
Aluminum Heads & SCAT cast Iron crank w/ Keith Black Hypereutectic
Pistons SCAT I-Beam Rods and Edelbrock intake manifold |
|
Cam Specs: Hydraulic Flat Tappet, .480 intake, .486
exhaust lift,224 intake & 230 exhaust duration @ .050 - 110 degree lobe
sep |
Extras
consist of Howell System Fuel pump, Howell Multi-port Fuel Injection,
Howell System distributor, Edelbrock water pump, MSD Plug wires,
Champion spark plugs and fuel lines |
General Motors 355 w/Forged Components
30 month/50,000 mile warranty
|
Part # BP3556CT |
385 Horsepower & 390
Foot/pounds of torque |
|
Price $5,995 +
shipping |
9.5 : 1 Compression ratio |
|
Base Engine: 4 Bolt Main 1
Piece Rear Main Seal |
DART
Aluminum Heads, SCAT forged crank, Probe Forged Pistons, SCAT I-Beam
Rods, Professional Products polished aluminum Dual Plane intake manifold |
|
Cam Specs: Hydraulic Roller,
.495 intake, .502 exhaust lift, 220 Intake & 224 exhaust duration @ .050
-110 degree lobe sep |
Also
Includes Blueprint Series Aluminum Valve Covers, Silver Seal chrome oil
pan and timing cover and Professional Products Harmonic damper |
1-888-355-7155
|
Part # BP3556CTC |
385 Horsepower & 390
Foot/pounds of torque |
|
Price $7,495
+ shipping |
9.5 : 1 Compression ratio |
|
Base Engine w/Carburetor and
extras |
DART
Aluminum Heads, SCAT forged crank, Probe Forged Pistons, SCAT I-Beam
Rods, Professional Products polished aluminum Dual Plane intake manifold |
|
Cam Specs: Hydraulic Roller,
.495 intake, .502 exhaust lift, 220 Intake & 224 exhaust duration @ .050
-110 degree lobe sep |
Extras
are Edelbrock Fuel Pump, Edelbrock 600cfm carburetor, MSD Pro-Billet
Distributor and Edelbrock water pump |
1-888-355-7155
|
Part # BP3556CTF |
415 Horsepower & 400
Foot/pounds of torque |
|
Price $9,499
+ shipping |
9.5 : 1 Compression ratio |
|
Base Engine w/ Fuel Injection
and extras |
DART
Aluminum Heads, SCAT forged crank, Probe Forged Pistons, SCAT I-Beam
Rods and Edelbrock intake manifold |
|
Cam Specs: Hydraulic Roller,
.495 intake, .502 exhaust lift, 220 Intake & 224 exhaust duration @ .050
-110 degree lobe sep |
Extras
consist of Howell System Fuel pump, Howell Multi-port Fuel Injection,
Howell System distributor, Edelbrock water pump, MSD Plug wires,
Champion spark plugs and fuel lines |
General Motors 383 w/Vortec Heads
30 month/50,000 mile warranty
|
Part # BP3830CT |
405 Horsepower & 440
Foot/pounds of torque |
|
Price $3,799
+ shipping |
9.5 : 1 Compression ratio |
|
Base Engine: 4 Bolt Main 2
Piece Rear Main Seal |
NEW
Cast Iron Vortec Heads, SCAT cast iron stroker crank, Keith Black
hypereutectic pistons, GM Heavy Beam rods, Professional Products
Aluminum dual plane intake |
|
Cam Specs:
Hydraulic
Flat Tappet, .487 intake, .508 exhaust lift, 234 intake & 244 exhaust
duration @ .050 - 110 degree lobe sep |
Also
includes chrome valve covers, Silver Seal oil pan and timing cover |
1-888-355-7155
|
Part # BP3830CTC* |
405 Horsepower & 440
Foot/pounds of torque |
|
Price $5,299
+ shipping |
9.5 : 1 Compression ratio |
|
Base Engine w/Carburetor and
extras
*Must
use 69-85 non-weighted flywheel |
NEW
Cast Iron Vortec Heads, SCAT cast iron stroker crank, Keith Black
hypereutectic pistons, GM Heavy Beam rods, Professional Products
Aluminum dual plane intake |
|
Cam Specs:
Hydraulic
Flat Tappet, .487 intake, .508 exhaust lift, 234 intake & 244 exhaust
duration @ .050 - 110 degree lobe sep |
Extras
are Edelbrock Fuel Pump, Edelbrock 750cfm carburetor, MSD Pro-Billet
Distributor, Edelbrock water pump, Blaster 2 Coil, MSD plug wires,
Champion Spark Plugs and Professional Products Damper |
General Motors 383 TBI Truck Applications
30 month/50,000 mile warranty
|
Part # BP38301CT |
280 Horsepower & 388
Foot/pounds of torque |
|
Price $3,599
+ shipping |
9.5 : 1 Compression ratio |
|
Base Engine w/ performance
chip: 4 Bolt Main 1 Piece Rear Main Seal |
Blueprint Premium cast iron heads, SCAT cast iron stroker crank, Keith
Black hypereutectic pistons, GM Heavy Beam rods, Edelbrock Performer TBI |
|
Cam Specs:
Hydraulic
Flat Tappet, .435 intake, .454 exhaust lift, 209 intake & 216 exhaust
duration @ .050 - 110 degree lobe sep |
Also
includes Silver Seal chrome oil pan timing cover and valve covers,
Performance Chip, HP Long SHot rockers and Elgin Hardened push rods |
1-888-355-7155
|
Part # BP38302CT |
315 Horsepower & 415
Foot/pounds of torque |
|
Price $4,399
+ shipping |
9.5 : 1 Compression ratio |
|
Base Engine w/ performance
chip: 4 Bolt Main 1 Piece Rear Main Seal |
World
Products cast iron heads, SCAT cast iron stroker crank, Keith Black
hypereutectic pistons, GM Heavy Beam rods, Edelbrock Performer TBI |
|
Cam Specs:
Hydraulic
Flat Tappet, .435 intake, .454 exhaust lift, 209 intake & 216 exhaust
duration @ .050 - 110 degree lobe sep |
Also
includes Silver Seal chrome oil pan timing cover and valve covers,
Performance Chip, HP Long Shot rockers and Elgin Hardened push rods |
General Motors 383 w/Cast
Components
30 month/50,000 mile warranty
|
Part # BP3836CT |
395 Horsepower & 440
Foot/pounds of torque |
|
Price $5,399
+ shipping |
9.5 : 1 Compression ratio |
|
Base Engine: 4 Bolt Main 2
Piece Rear Main Seal |
DART
Pro 1 Aluminum Heads, SCAT cast iron stroker crank, Keith Black
hypereutectic pistons, SCAt I-Beam rods, Professional Products Aluminum
dual plane intake |
|
Cam Specs:
Hydraulic
Flat Tappet, .480 intake, .486 exhaust lift, 224 intake & 230 exhaust
duration @ .050 - 110 degree lobe sep |
Blueprint Series aluminum valve covers, Kevco oil pan, Silver seal
chrome timing cover, Professional Products harmonic damper |
1-888-355-7155
|
Part # BP3836CTC |
395 Horsepower & 440
Foot/pounds of torque |
|
Price $6,899
+ shipping |
9.5 : 1 Compression ratio |
|
Base Engine w/Carburetor and
extras |
DART
Pro 1 Aluminum Heads, SCAT cast iron stroker crank, Keith Black
hypereutectic pistons, SCAT I-Beam rods, Professional Products Aluminum
dual plane intake |
|
Cam Specs:
Hydraulic
Flat Tappet, .480 intake, .486 exhaust lift, 224 intake & 230 exhaust
duration @ .050 - 110 degree lobe sep |
Extras
are Edelbrock Fuel Pump, Edelbrock 750cfm carburetor, MSD Pro-Billet
Distributor, Edelbrock water pump, Blaster 2 Coil, MSD plug wires,
Champion Spark Plugs |
1-888-355-7155
|
Part # BP3836CTF |
425 Horsepower & 450
Foot/pounds of torque |
|
Price $8,899
+ shipping |
9.5 : 1 Compression ratio |
|
Base Engine w/ Fuel Injection
and extras |
DART
Pro 1 Aluminum Heads, SCAT cast iron stroker crank, Keith Black
hypereutectic pistons, SCAT I-Beam rods, Edelbrock intake manifold |
|
Cam Specs:
Hydraulic
Flat Tappet, .480 intake, .486 exhaust lift, 224 intake & 230 exhaust
duration @ .050 - 110 degree lobe sep |
Extras
consist of Howell System Fuel pump, Howell Multi-port Fuel Injection,
Howell System distributor, Blaster 2 Coil, Edelbrock water pump, MSD
Plug wires, Champion spark plugs and fuel lines |
General Motors 383 w/Forged
Components
30 month/50,000 mile warranty
|
Part # BP3837CT |
400 Horsepower & 440
Foot/pounds of torque |
|
Price $6,095
+ shipping |
9.5 : 1 Compression ratio |
|
Base Engine: 4 Bolt Main 1
Piece Rear Main Seal |
DART
Pro 1 Aluminum Heads, SCAT forged crank, Probe forged pistons, SCAT
I-Beam rods, Professional Products Aluminum dual plane intake |
|
Cam Specs:
Hydraulic
Flat Tappet, .495 intake, .502 exhaust lift, 220 intake & 224 exhaust
duration @ .050 - 110 degree lobe sep |
Blueprint Series aluminum valve covers, Kevco oil pan, Silver seal
chrome timing cover, Professional Products harmonic damper |
1-888-355-7155
|
Part # BP3837CTC |
400 Horsepower & 440
Foot/pounds of torque |
|
Price $7,695
+ shipping |
9.5 : 1 Compression ratio |
|
Base Engine w/Carburetor and
extras |
DART
Pro 1 Aluminum Heads, SCAT forged crank, Probe forged pistons, SCAT
I-Beam rods, Professional Products Aluminum dual plane intake |
|
Cam Specs:
Hydraulic
Flat Tappet, .495 intake, .502 exhaust lift, 220 intake & 224 exhaust
duration @ .050 - 110 degree lobe sep |
Extras
are Edelbrock Fuel Pump, Edelbrock 750cfm carburetor, MSD Pro-Billet
Distributor, Edelbrock water pump, Blaster 2 Coil, MSD plug wires,
Champion Spark Plugs and fuel lines |
1-888-355-7155
|
Part # BP3837CTF |
440 Horsepower & 460
Foot/pounds of torque |
|
Price $9,699
+ shipping |
9.5 : 1 Compression ratio |
|
Base Engine w/ Fuel Injection
and extras |
DART
Pro 1 Aluminum Heads, SCAT forged crank, Probe forged pistons, SCAT
I-Beam rods, Edelbrock intake manifold |
|
Cam Specs:
Hydraulic
Flat Tappet, .495 intake, .502 exhaust lift, 220 intake & 224 exhaust
duration @ .050 - 110 degree lobe sep |
Extras
consist of Howell System Fuel pump, Howell Multi-port Fuel Injection,
Howell System distributor, Blaster 2 Coil, Edelbrock water pump, MSD
Plug wires, Champion spark plugs and fuel lines |
General Motors 496 w/Cast
Components
30 month/50,000 mile warranty
|
Part # BP4960CTC |
480 Horsepower & 550
Foot/pounds of torque |
|
Price $7,699
+ shipping |
9.0 : 1 Compression ratio |
|
Base Engine w/Carburetor and
extras |
GM
cast iron oval port heads with screw in studs and guide plates, SCAT
cast crankshaft externally balanced, Keith Black Hypereutectic pistons,
Hastings moly rings, Edelbrock Performer RPM airgap intake manifold,
Chrome valve covers, Milodon Cad plated oil pan |
|
Cam Specs:
Hydraulic
Flat Tappet, .552 intake, .555 exhaust lift, 230 intake & 236 exhaust
duration @ .050 - 110 degree lobe sep |
Extras
consist of Edelbrock 110gph fuel pump, Edelbrock 800cfm carburetor,
Edelbrock water pump, MSD Pro-Billet ignition system w/ coil and spark
plug wires |
Chrysler 408 Stroker
30 month/50,000 mile warranty
|
Part # BPC4080CT |
375 Horsepower & 460
Foot/pounds of torque |
|
Price $4,099
+ shipping |
9.8 : 1 Compression ratio |
|
Base Engine:
360 "LA" block |
|
Blueprint Magnum Cast Iron heads, SCAT cast iron crank, Keith Black
hypereutectic pistons, Chrysler Heavy Beam rods, Edelbrock RPM Air-Gap
intake manifold |
|
Cam Specs:
Hydraulic
Flat Tappet, .474 intake, .474 exhaust lift, 233 intake & 240 exhaust
duration @ .050 - 110 degree lobe sep |
Also
includes "Mopar Performance" valve covers, Chrome timing cover, Kevco 7
qt oil pan, Professional Products Harmonic Damper |
1-888-355-7155
|
Part # BPC4080CTC |
375 Horsepower & 460
Foot/pounds of torque |
|
Price $5,599
+ shipping |
9.8 : 1 Compression ratio |
|
Base Engine
w/Carburetor
and
extras |
|
Blueprint Magnum Cast Iron heads, SCAT cast iron crank, Keith Black
hypereutectic pistons, Chrysler Heavy Beam rods, Edelbrock RPM Air-Gap
intake manifold |
|
Cam Specs:
Hydraulic
Flat Tappet, .474 intake, .474 exhaust lift, 233 intake & 240 exhaust
duration @ .050 - 110 degree lobe sep |
Extras
are Holley Fuel Pump, Edelbrock 750cfm carburetor, MSD Pro-Billet
Distributor, Edelbrock water pump, Blaster 2 Coil, MSD plug wires,
Champion Spark Plugs and fuel lines |
Chrysler 408
w/ Forged Components
30 month/50,000 mile warranty
|
Part # BPC4081CT |
435 Horsepower & 500
Foot/pounds of torque |
|
Price $6,599
+ shipping |
10 : 1 Compression ratio |
|
Base Engine:
360 "LA" block |
|
Edelbrock Aluminum Performer Heads, SCAT cast iron crank, Keith Black
Forged Pistons, SCAT H-Beam rods, Edelbrock RPM Air-Gap intake manifold |
|
Cam Specs:
Hydraulic
Flat Tappet, .484 intake, .484 exhaust lift, 239 intake & 246 exhaust
duration @ .050 - 108 degree lobe sep |
Also
includes "Mopar Performance" valve covers, Chrome timing cover, Kevco 7
qt oil pan, Professional Products Harmonic Damper |
1-888-355-7155
|
Part # BPC4081CTC |
435 Horsepower & 500
Foot/pounds of torque |
|
Price $8,099
+ shipping |
10 : 1 Compression ratio |
|
Base Engine
w/Carburetor
and
extras |
|
Edelbrock Aluminum Performer Heads, SCAT cast iron crank, Keith Black
Forged Pistons, SCAT H-Beam rods, Edelbrock RPM Air-Gap intake manifold |
|
Cam Specs:
Hydraulic
Flat Tappet, .484 intake, .484 exhaust lift, 239 intake & 246 exhaust
duration @ .050 - 108 degree lobe sep |
Extras
are Holley Fuel Pump, Demon 825cfm carburetor, MSD Pro-Billet
Distributor, Edelbrock water pump, MSD Blaster 2 Coil, MSD plug wires,
Champion Spark Plugs and fuel lines |
1-888-355-7155
|
Part # BPC4081CTF |
450 Horsepower & 510
Foot/pounds of torque |
|
Price $9,999
+ shipping |
10 : 1 Compression ratio |
|
Base Engine
w/Fuel Injection
and extras |
|
Edelbrock Aluminum Performer Heads, SCAT cast iron crank, Keith Black
Forged Pistons, SCAT H-Beam rods, Edelbrock EFI intake manifold |
|
Cam Specs:
Hydraulic
Flat Tappet, .484 intake, .484 exhaust lift, 239 intake & 246 exhaust
duration @ .050 - 108 degree lobe sep |
Extras
are Holley Fuel Pump, Edelbrock Performer RPM 1000cfm Fuel injection ,
Mallory Pro-Billet Distributor, Edelbrock water pump, Blaster 2 Coil,
MSD plug wires, Champion Spark Plugs and fuel lines |
Ford 347 Stroker
30 month/50,000 mile warranty
|
Part # BP3472CT |
330 Horsepower & 380
Foot/pounds of torque |
|
Price $3,699
+ shipping |
9.5 : 1 Compression ratio |
|
Base Engine |
Blueprint cast iron heads, SCAT crank,
Keith Black Hypereutectic pistons, SCAT Forged
I-Beam rods, Professional Products Aluminum dual plane intake |
|
Cam Specs:
Hydraulic
Flat Tappet, .496 intake, .520 exhaust lift, 224 intake & 234
exhaust duration @ .050 - 110 degree lobe sep |
Also Includes Blueprint
Signature series aluminum valve covers and oil pan |
1-888-355-7155
|
Part # BP3472CTC |
330 Horsepower & 380
Foot/pounds of torque |
|
Price $5,199
+ shipping |
9.5 : 1 Compression ratio |
|
Base Engine w/ carburetor and
and extras |
Blueprint cast iron heads, SCAT crank,
Keith Black Hypereutectic pistons, SCAT Forged
I-Beam rods, Professional Products Aluminum dual plane intake |
|
Cam Specs:
Hydraulic
Flat Tappet, .496 intake, .520 exhaust lift, 224 intake & 234
exhaust duration @ .050 - 110 degree lobe sep |
Extras
are Edelbrock Fuel Pump, Edelbrock 600cfm carburetor, MSD Blaster 2 Pro-Billet
Distributor, Edelbrock water pump, Blaster 2 Coil, MSD plug wires,
MSDSpark Plugs, Silver Seal chrome timing cover,Prof. Products damper
and fuel lines |
Ford 347
w/Cast Components
30 month/50,000 mile warranty
|
Part # BP3470CT |
370 Horsepower & 390
Foot/pounds of torque |
|
Price $5,599
+ shipping |
9.5 : 1 Compression ratio |
|
Base Engine
|
DART Aluminum heads, Keith
Black Hypereutectic pistons, SCAT Forged
I-Beam rods, Professional Products Aluminum dual plane intake |
|
Cam Specs:
Hydraulic
Flat Tappet, .493 intake, .500 exhaust lift, 218 intake & 224
exhaust duration @ .050 - 110 degree lobe sep |
Blueprint Series aluminum valve covers, Silver Seal chrome oil pan & timing cover, Professional Products harmonic damper |
1-888-355-7155
|
Part # BP3470CTC |
370 Horsepower & 390
Foot/pounds of torque |
|
Price $7,099
+ shipping |
9.5 : 1 Compression ratio |
|
Base Engine w/Carburetor and
extras |
DART Aluminum heads, Keith
Black Hypereutectic pistons, SCAT Forged
I-Beam rods, Professional Products Aluminum dual plane intake |
|
Cam Specs:
Hydraulic
Flat Tappet, .493 intake, .500 exhaust lift, 218 intake & 224
exhaust duration @ .050 - 110 degree lobe sep |
Extras
are Edelbrock Fuel Pump, Edelbrock 600cfm carburetor, MSD Pro-Billet
Distributor, Edelbrock water pump, MSD Blaster 2 Coil, MSD plug wires,
NGK Spark Plugs, Silver Seal chrome dual sump oil pan and fuel lines |
1-888-355-7155
|
Part # BP3470CTF |
390 Horsepower & 400
Foot/pounds of torque |
|
Price $9,399
+ shipping |
9.5 : 1 Compression ratio |
|
Base Engine w/Fuel Injection
and extras |
DART Aluminum heads, Keith
Black Hypereutectic pistons, SCAT Forged
I-Beam rods, Professional Products Aluminum dual plane intake |
|
Cam Specs:
Hydraulic
Flat Tappet, .493 intake, .500 exhaust lift, 218 intake & 224
exhaust duration @ .050 - 110 degree lobe sep |
Extras
are Edelbrock Electronic Fuel Pump, Edelbrock Performer RPM Pro-Flo Fuel
Injection, Mallory Pro-Billet
Distributor, Edelbrock water pump, MSD Blaster 2 Coil, MSD plug wires,
NGK Spark Plugs, Silver Seal chrome dual sump oil pan
|
Ford 347
w/Forged Components
30 month/50,000 mile warranty
|
Part # BP3471CT |
425 Horsepower & 410
Foot/pounds of torque |
|
Price $6,099
+ shipping |
9.5 : 1 Compression ratio |
|
Base Engine |
DART Aluminum heads, Probed
forged pistons, SCAT Forged
I-Beam rods, Professional Products intake manifold |
|
Cam Specs:
Hydraulic
Roller, .544 intake, .555 exhaust lift, 216 intake & 224 exhaust
duration @ .050 - 112 degree lobe sep |
Blueprint Series aluminum valve covers, Silver Seal chrome oil pan & timing cover, Professional Products harmonic damper |
1-888-355-7155
|
Part # BP3471CTC |
425 Horsepower & 410
Foot/pounds of torque |
|
Price $7,595
+ shipping |
9.5 : 1 Compression ratio |
|
Base Engine w/Carburetor and
extras |
DART Aluminum heads, Probed
forged pistons, SCAT Forged
I-Beam rods, Professional Products intake manifold |
|
Cam Specs:
Hydraulic
Roller, .544 intake, .555 exhaust lift, 216 intake & 224 exhaust
duration @ .050 - 112 degree lobe sep |
Extras
are Edelbrock Fuel Pump, Edelbrock 750cfm carburetor, MSD Pro-Billet
Distributor, Edelbrock water pump, MSD Blaster 2 Coil, MSD plug wires,
Autolite Spark Plugs, Silver Seal chrome dual sump oil pan and fuel lines |
1-888-355-7155
|
Part # BP3471CTF |
435 Horsepower & 425
Foot/pounds of torque |
|
Price $9,895
+ shipping |
9.5 : 1 Compression ratio |
|
Base Engine w/Fuel Injection
and extras |
DART Aluminum heads, Probed
forged pistons, SCAT Forged
I-Beam rods, Professional Products intake manifold |
|
Cam Specs:
Hydraulic
Roller, .544 intake, .555 exhaust lift, 216 intake & 224 exhaust
duration @ .050 - 112 degree lobe sep |
Extras
are Edelbrock Electronic Fuel Pump, Edelbrock Performer RPM Pro-Flo Fuel
Injection, MSD Pro-Billet
Distributor, Edelbrock water pump, MSD Blaster 2 Coil, MSD plug wires,
Autolite Spark Plugs, Silver Seal chrome dual sump oil pan
|
Ford
408 w/Cast Components
30 month/50,000 mile warranty
|
Part # BP4080CT |
400 Horsepower & 470
Foot/pounds of torque |
|
Price $5,799
+ shipping |
9.8 : 1 Compression ratio |
|
Base Engine |
NEW Tri-State Aluminum heads, Keith
Black Hypereutectic pistons, SCAT
I-Beam rods, Professional Products Aluminum dual plane intake |
|
Cam Specs:
Hydraulic
Flat Tappet, .510 intake, .512 exhaust lift, 224 intake & 230
exhaust duration @ .050 - 110 degree lobe sep |
Blueprint Signature Series aluminum valve covers, Silver Seal chrome timing cover,
Kevco 7 qt front sump oil pan, Comp Cams roller rocker arms & pushrods,
12 point stainless stell intake bolts and 12 point ARP head bolts |
1-888-355-7155
|
Part # BP4080CTC |
400 Horsepower & 470
Foot/pounds of torque |
|
Price $7,299
+ shipping |
9.8 : 1 Compression ratio |
|
Base Engine w/Carburetor and
extras |
NEW Tri-State Aluminum heads, Keith
Black Hypereutectic pistons, SCAT
I-Beam rods, Professional Products Aluminum dual plane intake |
|
Cam Specs:
Hydraulic
Flat Tappet, .510 intake, .512 exhaust lift, 224 intake & 230
exhaust duration @ .050 - 110 degree lobe sep |
Extras
are Edelbrock 110 ghp Fuel Pump, Edelbrock 750cfm carburetor, MSD Pro-Billet
Distributor, Edelbrock water pump, MSD Blaster 2 Coil, MSD plug wires,
Champion Spark Plugs, Professional Products damper |
1-888-355-7155
|
Part # BP4080CTF |
430 Horsepower & 475
Foot/pounds of torque |
|
Price $9,299
+ shipping |
9.8 : 1 Compression ratio |
|
Base Engine w/Fuel Injection
and extras |
NEW Tri-State Aluminum heads, Keith
Black Hypereutectic pistons, SCAT
I-Beam rods, Edelbrock Performer EFI Intake manifold |
|
Cam Specs:
Hydraulic
Flat Tappet, .510 intake, .512 exhaust lift, 224 intake & 230
exhaust duration @ .050 - 110 degree lobe sep |
Extras
are Edelbrock Electronic Fuel Pump, Edelbrock Performer RPM Pro-Flo Fuel
Injection, Mallory Pro-Billet
Distributor, Edelbrock water pump, MSD Blaster 2 Coil, MSD plug wires,
Champion Spark Plugs, Silver Seal chrome dual sump oil pan
|
|
